Ultra Competition Fuel Injection - Special Installation Guide
__________________________________________________________________________________________
This instruction manual is intended for standard Ultra Competition Fuel Injection
Kits. The Sedan Competition Fuel Injection Kit
is installed in a similiar manner. The major difference is the use of the Space
Saver style linkage and manifolds. This enables throttle
bodies machined for injectors to be used within a sedan engine compartment.
The TPS will now be on the left side throttle body (drivers side)
and the injectors will be inboard. There are two extensions used on the aluminum
linkage arms to correctly align the linkage rods. Refer to the above
photo for a completed view of a Sedan Competition Kit.
_______________________________________________________________________________________
In some applications
a situation referred to as "Run-On" will occur. This is where the
engine continues to run
after the
ignition switch is shut off. In a run on situation a diode can be put in line
with the alternator field wire.
This diode will keep voltage from leaking through to the fuel injection system.
____________________________________________________________________________________________
Refer to the original
manufacturers mounting instructions. Attach the wiring as shown on this page.
Wiring connections
for other types of ignition systems will vary.
The above ignition
system (COMPU-FIRE DIS-IX) will function only with special
CB Dash Module part#7650
___________________________________________________________________________________________
Refer to the original
manufacturers mounting instructions. Attach the wiring as shown on this page.
Wiring connections
for other types of ignition systems will vary.
