Home > Cylinder Heads >

044™ CNC Mini Wedge Ports (specify size)

044â„¢ CNC Mini Wedge Ports (specify size)
 
Alternative Views:
List Price: $1,309.95
Your Price: $1,139.95
You save $170.00!

Price with Selected Options: $1,139.95


Availability:: Usually Ships in 6 to 8 Weeks
Product Code: CNCMINIWEDGE


Size*:

Valves*:

Springs:

Retainers:

Shop Work:
*May require milling of first fin.
**Will require removal of first fin.*may require removal of one fin

Qty:  
Description
 
With Stainless Steel valves, CNC Porting, Dual Hi-Rev Springs, Chromoly Retainers, and SUPERGRIP™ Valve Locks.

Slightly higher port volume than the CNC Ultra Mag, allowing for greater RPM and power potential. The Mini Wedge Port uses a 43mm intake valve and flows enough air to produce over 200 horsepower on N/A engines. Also performs well on turbo applications.

The Mini Wedge Port was designed for engines needing a smaller port than the regular Wedge Port and Ultra Wedge Port 044™ heads.

This head is ideal for street and race applications on engines as small as 1776cc's and as big as 2400cc's. The Mini Wedge Port may be the little brother to the regular and ultra Wedge Port 044™ but it doesn't run like it!

The Mini Wedge Port 044™ is available with a 43x37.5 valve combination in 90.5/92mm bore and 94mm bore. 90.5mm/92mm Chamber volume is 64cc, 94mm Chamber volume is 67cc.

Heads are sold as a Pair

- Specify Camshaft & Rockers (Brand and Ratio) when ordering! (Sold Separately)

WARNING: Due to inconsistent advertised rocker arm ratios, it's imperative to check total lift and ensure you have a minimum of .050" from coil bind before final engine assembly.
Features
  • 12mm 3/4" Reach Spark Plug Holes
  • 43mm x 37.5mm SUPERGRIP 214N Single Groove S/S Valves with Stellite Tips
  • SUPERGRIP Chromoly Valve Spring Retainers
  • SUPERGRIP Single Groove Valve Locks
  • Performance 4 Angle Valve Job (30, 45, 60 & 75) on seats
  • Manganese Bronze Racing Valve Guides
  • Tungsten Carbide Alloy Valve Seats
  • Dual Hi-Rev Chrome Silicon Valve Springs

Accessory Parts
3168 Type-1 Offset Manifolds - IDF & DRLA (set of 2) 3174 Mini Wedge Port Big Beef Match Ported Manifolds - IDF & DRLA (set of 2) 3173 Mini Wedge Port Big Beef Match Ported Manifolds - IDA (set of 2)
Your Price: $169.95

Add
Your Price: $334.95

Add
Your Price: $376.95

Add
Type-1 Offset Manifolds Mini Wedge Port Big Beef Match Ported Manifolds - IDF & DRLA Mini Wedge Port Big Beef Match Ported Manifolds - IDA

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 3 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 Very surprised and happy with these. February 27, 2024
Reviewer: Jeffrey Fischer from Canton, GA United States  
I purchased these to replace some really old 1454 044 Super Mags from the 90’s which I suspected was the reason my 2276 always ran on the hot side. I called CBP to ask for a recommendation and after that conversation these are what I selected.
Well these certainly have unlocked the hidden potential in my engine.
Doesn’t run hot anymore and is a completely different experience. The performance gain is impressive.
Thank you CB Performance!

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Love these heads October 2, 2020
Reviewer: Jimmy from Virginia  
I run these on my 82 x 90.5 turbo motor. I have run the hell out these head on the track and off. Motor has seen 26lbs boost and the heads takes it like champ. I run these heads up to 7500 RPM and had not a bit of trouble out of them I do have the upgrade spring package. They pull like a freight train on the top end. Very happy with the money I spent.  CB make some great products and I am thankful.

Was this review helpful to you?

  7 of 7 people found the following review helpful:
 
5 of 5 Great heads for street turbo October 6, 2016
Reviewer: Bob Meyer from Scotts Valley, CA United States  
I have these heads on my 90.5 x 78 blow through street turbo engine, and they are terrific. Excellent torque throughout the rev range 3000 - 7000 RPM, and great top end power also. Replaced a set of Street Eliminators with these - very pleased with the result. Highly recommended.

Was this review helpful to you?


Browse for more products in the same category as this item:

Cylinder Heads
Cylinder Heads > CNC Ported 044™ Cylinder Heads
CB Performance Products