The Torque Multiplier tool (aka Torque-Meister, Torque-Dude) allows you to break loose (or tighten) those stubborn axle nuts and flywheel gland nuts (36mm) with ease using just a 11mm socket on a 3/8" drive torque wrench! With the additional leverage, 25 ft/lb from your torque wrench delivers 225 ft/lb to the rear axle nut, and 30 ft/lb delivers 270 ft/lb to the flywheel gland nut.

Includes 2 pinion gears for use with both 6V-180mm, and 12V-200mm flywheels. Fits both 4x130 and 5x205 wheels.

NOTE: Stock 12mm lug bolts are not compatible (too short). CB recommends at least 15mm of thread using a longer bolt or stud and nut combination, sold separately.

4220 12mm Wheel Stud
4224 12mm Lug Nut