 |
 |
 |
|
Designed for maximum power output on Regular Fuel. The "Builders Choice" Engine Kits are set up with the novice builder in mind. Easy to assemble with predetermined compression ratio's, connecting rod length, camshaft and cylinder heads. The "Builder's Choice" engine kit takes all the guess-work out of building your own engine. Each kit is listed with the correct carburetor size, intake manifold, and exhaust type needed to achieve the advertised Horsepower output. Never before have engine-building secrets like these been let out to the public! Take advantage from years of engine building experience with the Builders Choice Engine Kit.
OEM Distributor Drive Pinions and Brass Distributor Drive Gears are NO LONGER AVAILABLE. Due to this, we can no longer supply them in the Builder's Choice Engine Kits.
LABOR OPTIONS: Balance Engine Kit Includes:
- Balanced Forged Pistons
- Balanced Rotating Assembly (Crankshaft,
Flywheel & #1312 Pressure Plate)
Builder's Choice Engine Kits
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 1187 - 220 HP 2387cc Builders Choice Engine Kit includes:
- 2298 - Eagle Drag Race Camshaft (FK-89)
- 1274 - AS41 Dual Relief Super Case - T-1 & 2 (84 x 94) Full Flowed
- 2665 - Super Race Rods (Chevy Journal) 5.5" length (set of 4)
- 1859 - Maxi 30 Full Flow Oil Pump
- 1278 - CB High Performance Case Kit
- 1537 - 28mm Ultralight Lifters (set of 8)
- 1941 - Rear Main Seal - 13, 15, & 1600cc
- 1804 - Main Bearings STD
- 2672 - Clevite Chevy Rod Bearings
- 1399 - Straight Cut Cam Gears
- 1565 - Racing Push Rod Tubes (set of 8)
- 1445 - 044™ CNC Street Fighter - VW650 Valve Springs & Titanium Retainers (46 x 37.5) 94 Bore
- 1706 - 4 Quart Ultra Wide Glide Sump
- 1629 - Chromoly Tapered Push Rods
- 1037 - 94mm Wiseco Forged Piston Set - 94mm (set of 4) with XX Style Ring Pack (1 x 1.2 x 2.8)
- 1038 - 94mm Mahle Barrels
- 1998 - 10mm Deflector Plates - fits 13, 15, & 1600cc (set of 2)
- 1904 - Case Washer Set
- 1946 - Posi-Seal Cam Plug
- 2674 - Super Race Crank - 86mm Stroke - Chevy Journals
- 1390 - 94mm 0.060' thick - Copperhead Gaskets (set of 4)
- 1303 - Forged Chromoly Lightweight Flywheel - 200mm (o-ring seal)
- 1360 - Racing Gland Nut with Washer
- 1223 - Cylinder Head Studs - 10mm Chromoly - Dual Port
- 1849 - Racing Camshaft Bearing Set
- 1918 - Crankshaft Gear Assembly Kit w/Racer Spacer
- 1577 - Forged 1.4:1 Rocker Arms w/.060 Rocker Shims
- 1362 - End Play Shim Kit
- 1908 - Case Lock Nut Kit
- 1277 - Engine Case Bolts (set of 3)
- 1973 - Gasket Set - 13, 15, & 1600cc Dual & Single Port Engines
- 1095 - Aluminum Barrel Spacers - 94mm x .200" (set of 4)
- LABOR-CC-CS - CC Heads to 53cc
- LABOR-FLOW - Full Flow Case
- LABOR-CCS - Convert Case 8mm to 10mm Case Savers
- LABOR-CFS - Clearance Cam For Stroke
- HP rating is based on Dual 48mm IDA Carbs, 1 3/4" Merged Exhaust, match ported big beef manifolds, compression is set at 10.5:1 using listed parts in kit. Premium fuel is required for this kit.
|
|
|
|
|
|
|
engine running good 
