 |
 |
 |
|
Designed for maximum power output on Regular Fuel. The Builders Choice Engine Kits are set up with the novice builder in mind. Easy to assemble with predetermined compression ratio's, connecting rod length, camshaft and cylinder heads. The Builder's Choice engine kit takes all the guess-work out of building your own engine. Each kit is listed with the correct carburetor size, intake manifold, and exhaust type needed to achieve the advertised Horsepower output. Take advantage from years of engine building experience with the Builders Choice Engine Kit.
OEM Distributor Drive Pinions and Brass Distributor Drive Gears are NO LONGER AVAILABLE. Due to this, we can no longer supply them in the Builder's Choice Engine Kits.
LABOR OPTIONS: Balance Engine Kit Includes:
- Balanced Forged Pistons
- Balanced Rotating Assembly (Crankshaft,
Flywheel & #1311 Pressure Plate)
Builder's Choice Engine Kits
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 1180 - 105 HP 1776cc Builders Choice Engine Kit includes:
- 2241 - Cam Only T-1
- 1275 - AS41 Dual Relief VW Universal Engine Case (fits Type-1 & 2)
- 1289 - Super Race Rods (VW rod journal) 5.400" (set of 4)
- 1859 - Maxi 30 Full Flow Oil Pump
- 1278 - CB High Performance Case Kit
- 1537 - 28mm Ultralight Lifters (set of 8)
- 1941 - Rear Main Seal - 13, 15, & 1600cc
- 1804 - Main Bearings STD
- 1865 - Rod Bearings T/1 STD
- 1525 - Eagle Cam Gear
- 1565 - Racing Push Rod Tubes (set of 8)
- 1672 - Panchito 044 (40 x 35.5) 90.5/92 Bore (two heads) w/ Dual Hi Rev Valve Springs
- 1770 - Thin Line Oil Sump - 1 1/2 qt.
- 1628 - Chromoly Push Rods - blank end (.035")
- 1052 - Super Big Bore Kit, 90.5 x 69mm
- 1030 - True-Arc Wrist Pin Locks (set of 8)
- 1999 - 8mm Deflector Plates - fits 13, 15, & 1600cc (set of 2)
- 1904 - Case Washer Set
- 1946 - Posi-Seal Cam Plug
- 1105 - 69mm 4140 Forged Chromoly Crank
- 1303 - Forged Chromoly Lightweight Flywheel - 200mm (o-ring seal)
- 1360 - Racing Gland Nut with washer
- 1229 - 8mm Chromoly Head Stud Kit - Dual Port
- 1849 - Racing Camshaft Bearing Set
- 1918 - Crankshaft Gear Assembly Kit w/Racer Spacer
- 1685 - CB Super Stock Rocker Arm Complete Kit 1.25:1 Ratio (includes Swivel Feet)
- 1362 - End Play Shim Kit
- 1908 - Case Lock Nut Kit
- 1277 - Engine Case Bolts (set of 3)
- 1973 - Gasket Set - 13, 15, & 1600cc Dual & Single Port Engines
- LABOR-MC-BB - Machine Case - Big Bore
- LABOR-FLOW - Full Flow Case
- HP is rated using Dual 40mm IDF Carbs, 1 1/2" Merged Header. Compression is set at 8:1 using listed parts in kit. Mid Grade fuel is required for this kit.
|
|
|
|
|
|
|
Kit weight 
