| |
 |
 |
 |
|
Worked very well! RECOMMENDED! |
January 12, 2019 |
| Reviewer:
DuckmanCycles and VW Garage from Pensacola, FL United States
|
|
Worked very well with ICT carbs that I used in the past, the fitment is pefect. I also used this kit with a set of Dellorto 34 FRD and with minor modification (redrill the mounting holes and solder closed the old ICT holes in filter bases and swap left and right sides) this kit worked quite brilliantly. The only negative thing I have to say is the teardrop-shaped linkage bits bend too easily, especially the left side with the added leverage of the extension required there. When syncing carbs and tightening the linkage these teardrop bits can bend and throw off your work, you'll have to resync again. I made new pieces that were thicker, problem solved! Thanks CB Performance!
Was this review helpful to you? 
|
|
 |
|
 |
|