 |
 |
 |
|
Designed for maximum power output on Regular Fuel. The "Builders Choice" Engine Kits are set up with the novice builder in mind. Easy to assemble with predetermined compression ratio's, connecting rod length, camshaft and cylinder heads. The "Builder's Choice" engine kit takes all the guess-work out of building your own engine. Each kit is listed with the correct carburetor size, intake manifold, and exhaust type needed to achieve the advertised Horsepower output. Never before have engine-building secrets like these been let out to the public! Take advantage from years of engine building experience with the Builders Choice Engine Kit.
OEM Distributor Drive Pinions and Brass Distributor Drive Gears are NO LONGER AVAILABLE. Due to this, we can no longer supply them in the Builder's Choice Engine Kits.
LABOR OPTIONS: Balance Engine Kit Includes:
- Balanced Forged Pistons
- Balanced Rotating Assembly (Crankshaft,
Flywheel & #1311 Pressure Plate)
Builder's Choice Engine Kits
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 1183 - 150 HP 2110cc Builders Choice Engine Kit includes:
- 2246 - Eagle Racing Camshaft (T-1)
- 1274 - AS41 Dual Relief Super Case - T-1 & 2 (82 x 90.5) Full Flowed
- 1289 - Super Race Rods (VW Journal) 5.400" length (set of 4)
- 1859 - Maxi 30 Full Flow Oil Pump
- 1278 - CB High Performance Case Kit
- 1537 - 28mm Ultralight Lifters (set of 8)
- 1941 - Rear Main Seal - 13, 15, & 1600cc
- 1804 - Main Bearings STD
- 1865 - Rod Bearings T/1 STD
- 1399 - Straight Cut Cam Gears
- 1565 - Racing Push Rod Tubes (set of 8)
- 1672d - Panchito 044 (40 x 35.5) 90.5/92 Bore (two heads) w/ Dual Hi Rev Valve Springs
- 1770 - Thin Line Oil Sump - 1 1/2 qt.
- 1628 - Chromoly Push Rods - blank end (.035")
- 1053 - Super Big Bore Kit, 90.5 x 82mm
- 1030 True-Arc Wrist Pin Locks (set of 8)
- 1999 - 8mm Deflector Plates - fits 13, 15, & 1600cc (set of 2)
- 1904 - Case Washer Set
- 1946 - Posi-Seal Cam Plug
- 1154 - Super Race Crank - 82mm Stroke - VW Journals
- 1299 - .040" Barrel Shims (90.5 & 92mm)
- 1387 - 92mm 0.040" thick - Copperhead Gaskets (set of 4)
- 1303 - Forged Chromoly Lightweight Flywheel - 200mm (o-ring seal)
- 1360 - Racing Gland Nut with washer
- 1229 - 8mm Chromoly Head Stud Kit - Dual Port
- 1849 - Racing Camshaft Bearing Set
- 1918 - Crankshaft Gear Assembly Kit w/Racer Spacer
- 1685 - CB Super Stock Rocker Arm Complete Kit 1.25:1 Ratio
- 1362 - End Play Shim Kit
- 1908 - Case Lock Nut Kit
- 1277 - Engine Case Bolts (set of 3)
- 1973 - Gasket Set - 13, 15, & 1600cc Dual & Single Port Engines
- HP rating is based on Dual 44mm IDF Carbs with match ported Big Beef Manifolds, 1 5/8" Merged Header, Compression is set at 8.8:1 using listed parts in kit. Premium fuel is required for this kit.
|
|
|
|
|
|
|
2110cc 
