Customer Rides - Buggy

Smooth & Black
Name: Derek & Jan Fox Location: United Kingdom Make: VW Dune Buggy Engine: 1776cc Carbs: Dellorto 40 DRLA Exhaust: Ceramic Header
	Here is a couple of pictures of Derek & Jan's ongoing project, accross the pond. The buggy now features stainless roll-over and side bars. They hope to be on the road soon.
Features: Engle 110 Cam, CB Dropped Spindles, and 16" Split Rims.

Yellow Buggy
Name: Clyde Wylie and Family Location: Visalia, California Make: 1972 VW Dune Buggy Engine: 1500cc Carbs: Single Solex Carb
	Well I bought it on fathers day as my fun car but my but my kids (and wife) get more use out of it so yeah they own it, I just (try to) fix it. I bought a new 1600cc stock engine from CB with dual port's and dual carbs eventually I would like to upgrade the heads and add electronic ignition.
"Prices along with customer service from CB has been great, they were very helpful and prompt with replies."

Fun Machine
Name: Dan Stacy Location: Visalia, CA Make: 62 VW Dune Buggy Engine: 1915cc Carbs: Dual 44 Webers
	Additional Features: Porsche 914 Seats "Fun Machine to Drive"

Fully Street Legal
Name: Jan Andersson Location: Norrtaelje, Sweden Make: 1969 Beach Buggy Engine: 2387cc
	Engine Specs: Balanced and Blueprinted Dual Weber 48 IDA Fk 89 and lifters from CB Flanged 86 mm Crankshaft Angle Flo Heads Drysump by Sune Jansson No Nitroz Runs on Pump Gas and M&H Street Tyres
Weight With Driver: 1600 lb Best 1/4 mile Time: 11.29@114mph

Stroker Turbo Buggy
Name: Brian Kalinski Location: Martins Ferry, OH Engine: 2176cc Turbo Stroker Turbo: Schwitzer Blow Through Carbs: Dual 40 Dellortos
	Thanks to all who have helped me with my fuel problems you guys/gals have been great! With boost set at 15lbs and shift at 6500 this buggy really moves!
Thanks to your shop, Igot it running really well. With the right fuel pump and turbo regulator this thing really hauls *#%! Not sure of the Horsepower output, but at 18 lbs. of boost, all you can di is hold it in the road! I've never been beat from red light to red light (vets old and new, hot rods and street cars) - bring em on! I race a 72 chevy vega @ 6.25 in the 1/8th, and this buggy with a set of slicks.. well who knows!?! "Thanks. I love your shop!"

Glitter Bug
Name: Troy Bryant Location: Visalia, CA Engine: 2016cc Turbo Stroker Make: 64 Meyers Manx Trans: Pro Street
	Features: Kennedy Clutch, CB Comp 044 Heads (170hp), C/W Crank Rods, 1.25 Rockers, Dual 44 IDF Weber Carbs, Built by Robert Romero of Visalia German Automotive
Duck Boards built by Owner, Austin Headliner Seats, Custom Tower/Roll Bar, Dual Cannon Exhaust, Filter Pump, Thin Line Sump, Centerline Wheels (polished) and Hurst Shifter.
Awesome Paint Job by Pepper - Street Dreams (6 lbs. Metal Flake in paint)

Street Buggy
Name: Gilbert Soto Location: Mayagüez, Puerto Rico Trans: Stock 1971
	Features: The engine is a 69 x 88 with CB 40 x 35.5 ported and polished heads, 12 lb. Flywheel, Kennedy 1700 lb. P.P. CB 44 IDF carbs, Electronic Ignitor, Bosch Blue coil, CB Front Disk Brake Kit (blank rotors that were drilled for 5 lug Ford), CB Air-Fuel Ratio Gauge and oxygen sensor, original vw speedometer, VDO tachometer and oil pressure gauge, and New wiring.

Home Made Buggy
Name: Peter Boon Location: Rotterdam, Netherlands Trans: 1966 Super Buggy, VW based buggy
	It sits on an aluminum floor panel. The axles are from a VW 181 performed with disk brakes from Porsche. The transbox is from a t2 van.
The engine is from a 911 3.0 sc wich a rebuild from scratch with 2 x 3 weber 45mm carbs. The engine delivers 280 hp to the rear wheels. www.lowbudgetclub.nl

Cobalt Blue Buggy
Name: Mike and Wendy Dawson Location: Ridgecrest, CA Make: 1969 VW Engine: 2275cc Carbs: 44 Webers I built the 2275 engine using a 120 Engle cam, dual 44 Weber’s and too many other parts to list.
	It’s a 1969 pan, Manx style dune buggy, painted corvette cobalt blue. Linex’d inside and out, 3 inch body lift, 3 inch raised spindle, adjustable spring plates, 4 wheel CNC disc brakes, Bead lock wheels, 2275 engine with all the goodies, including Sway away adjustable torsion plates and bars, adjustable front beam, 3 inch raised spindles, and full cage with covered ice chest on rear.

Fishbaugh's Buggy
Name: Randall Fishbaugh Location: Tulare, CA Way too many things to list.. I'll just say lots of parts came from CB Performance. The Body even came from CB! The tube chassis I built myself.

Deserter Buggy
Name: Mike Ragonese Location: Hopedale, MA
	I just got my Deserter mid-engine street buggy completed. Pat did the turbo motor and I built the rest of the entire car from the ground up including constructing the mid-engine frame, the aluminum work, and bringing the 'glass body, that was total junk, back to life.
I did all of the bodywork but had a pro shoot the Ferrari Rosso Corsa Red paint. Rancho did the tranny. The car is a screamer. I started buying parts from Claudes Buggies back around the early 70s. If you like what you see you can check out the entire build at mikeragonese.shutterfly.com. I think you'll like it.

Merz's 4-Seater
Name: David Thomas Merz Location: New Hudson, MI XL1 4-Seater Frame (Chrome Molly) 2200cc Type-4 Motor CB Performance Fuel Injection Turbo Charged & Intercooled
	091 Bus Trans All Regeared Home Made 'A' Arm Front & Rear Suspension King Rear Shocks Koni Front Shock 4 Wheel Disc Brakes All Built by David Merz

Hahn's 70 Manx
Name: Tom Hahn Location: Adelaide, Australia Make: 1970 Meyer's Manx Engine: 1976cc
	- 5 speed - LSDiff - 125hp

See Other Rides...

To add your vehicle to our Customer Rides Section, just send your specs, along with atleast two pictures of your vehicle, to the Webmaster.

If you havn't already submitted your vehicle to be in our Customer Rides section, what are you waiting for? The T-2, and T-3 sections are looking a little thin... Can your ride fill it in?